Page 146 - 2018wd_ctr_cat
P. 146

                COMMERCIAL MOTORS
 56 FRAME 4 IN 1 MOTORS
TEFC, C-Face with Removable Base.
This unique 4-in-1 desigm allows for replacement of Dripproof, TEFC, C-Face, or Rigid base motors.
* Double sealed ball bearings, mechanically locked on shaft end • Bolt on, easily removable rigid base.
• Class F insulation (3-Phase only)
• Suitable for horizontal or vertical mounting
   THREE PHASE 208-230/460V SINGLE PHASE 115/208-230V
• INVERTER DUTY
• CAPACITOR START
H.P. RPM Frame Part No. H.P. RPM 1/3 3600     56C D390*     1/3   1800 1/3 1800         56C G580*           1/2   3600 1/2 3600 56C D391 1/2 1800 1/2 1800 56C G581 3/4 3600 3/4 3600 56C D392 3/4 1800 3/4 1800 56C G582 1 3600
Frame Part No.
                  1 3600 56C D393A 1 1800
56C     G570 56C       D311 56C G571 56C D312 56C G572 56C D313 56C G573 56C D314^ 56HC G574^
1 1800 56C G583A 11⁄2 3600 11⁄2 3600 56C D394A 11⁄2 1800 11⁄2 1800 56HC G584A 2 3600
56HC
D315^ G575^
        2 3600 56HC D395A 2 1800
2 1800 56HC G585A ^CAP START/CAP RUN
3 3600 56HC D396A
3 1800 56HC G590A
CROP DRYER MOTORS
56HC
      *TENV
                      Crop Dryer, Single Phase Dripproof/Air Over, Rigid Base
 • Double sealed ball bearings • Continuous duty
• Class F insulation system • 230V • 3600 RPM
• Keyed shafts with 1/4”-20 UNC tapped hole in end
• Thermostats for thermal overload protection (auto reset Z304) • 34” long leads for ease of installation • Capacitors included,
• Extra nameplate included, loose, for remote mounting
140
  HP Frame 3 - 4.5 145TZ 5 - 7.5 184TZ
Shaft Amps Weight
Part No.
       7 - 9     184TZ 7 - 10       184TZ 10 - 15 215TZ
7/8” x 3” 13.0 - 19.0 43 11⁄8” x 3” 27.2 - 35.0 98 11⁄8” x 3” 36.5 - 46.0 83 11⁄8” x 3” 31.0- 42.0 95 11⁄8” x 31⁄2” 39.5- 61.5 159
Z304 Z305A Z306A Z307A Z308
                Part numbers and illustrations are for identification only © 1971-2018 w.d. armstrong corp.
 




























































   144   145   146   147   148