Page 150 - 2018wd_ctr_cat
P. 150

                POOL PUMP MOTORS
Features: All Copper Windings • Auto Protector • Capacitor Start
• NEMA “56C” Face Mount • Not Reversible • Open Drip Proof
• Rotation (CCWPE) • Sealed Ball Bearings • Sealed Switch Design • “1081” Design • 50° C Ambient • 60 HZ
• 303 Stainless Shaft (56J & 56C) • 304 Brg. Shaft End
Max. Service
   HP RPM 1/2 3450 3/4 3450
1 3450 11⁄2 3450
Used on many Sta-Rite, Red Jacket, Pac Fab, American Products and Sears Jet and Pool Pumps
Features: All Copper Windings • Auto Protector • Capacitor Start
• High Service Factors • Open Drip Proof
NEMA-C FLANGE POOL FILTER MOTORS • SINGLE SPEED
   Volts
Amps Factor Frame
Part No. Shaft
115/230 115/230 115/230 115/230 115/230 115/230
11.0/5.5 1.6 56J 14.6/7.3 1.5 56C 15.0/7.5 1.5 56J 17.0/8.5 1.5 56C
ST1052 Thd. SK1072 Key ST1072 Thd. SK1102 Key ST1102 Thd. SK1152 Key
           18.6/9.3 1.5
56J
56C
56J         ST1152     Thd.
 19.4/9.7 1.3 115/208-230 19.6/10.4-9.8 1.5
               SQUARE FLANGE POOL FILTER MOTORS
   • Rotation (CCW Pump End) • Stainless-Steel - 303 Threaded Shaft • Sealed Ball Bearings • 50° C Ambient • 60HZ
HP RPM 1/2 3450 3/4 3450
Max. Service
  1 3450 11⁄2 3450
115/230 8.2/4.1 1.3 48Y USQ1052 115/230 11.8/5.9 1.27 48Y USQ1072 115/230 14.8/7.4 1.25 48Y USQ1102 115/230 19.2/9.6 1.1 48Y USQ1152
Volts Amps Factor Frame Part No.
        ABOVE GROUND SWIMMING POOL PUMP MOTORS
                   • Split Phase & Capacitor Start • Single Phase • Drip proof • Ball Bearing • Rigid Base
 Features: 12 & 3 O’clock Conduit Entries • 40° C Ambient
• Class B Insulated • CCWPE Rotation • Through Bolt Mount
• 48/56 Base Mounting • 31/2” Shaft Height • 48Y Frame
• Four Thru Bolts on a 5.146 Bolt Circle
Applications: Spa, above ground swimming pool and jetted tub pumps.
  Century Flex-48 W/Stainless Steel Shaft & Ball Bearings • “1081” • “1795” • “1563” • Rigid Base
HP
RPM Volts Amps Type
Part No.
1/2 3/4 1 2
3450 115 7.2 Split Phase 3450 115 9.8 Split Phase 3450 115 12.0 Split Phase 3450 230/115 10.0/20.0 Split Phase
BN23V1 BN24V1 BN25V1 BN40V1
         Two Speed 3450/1750 RPM, Ball Bearing, Rigid Base
 11⁄8
11⁄2   3450/1750 115 16.4/4.4 21⁄4         3450/1750 230       8.5/2.8
BN37V1 Cap Start BN50V1
3450/1750 115 11.2/2.9
Cap Start
          31⁄3 41⁄3
3450/1750 230 12.0/3.5 3450/1750 230 12.0/3.5
Cap Start/Run Cap Start/Run
BN62 BN63
Cap Start/Run       BN61
 144
Part numbers and illustrations are for identification only © 1971-2018 w.d. armstrong corp.
 









































   148   149   150   151   152