Page 218 - 2018wd_ctr_cat
P. 218

                "PaNel tyPe" 2 SiDeD Metal
aiR filteR gage
DiSPoSaBle aiR filteRS
    ORDER BY SIZE
An easy-to-use, easy-to-read gage to monitor filter media loading so that filter media may be changed when needed. The gage is installed between the blower and the filter, where a slight vacuum exists due to the air-flow resistance of the air filter. Air flowing into the gage, around the calibration screw, lifts a vane in proportion to the negative pressure in the blower compartment. As the air filter loads, the vacuum increases, raising the vane to indicate a filter change is necessary.
   StaNDaRD PaCKagiNg:
g99
12 FILTERS PER CARTON
Size     1 INCH FILTER Size 14”X25”X1”             20”X20”X1”
Size 10”X10”X1” 10”X20”X1” 10”X24”X1” 10”X25”X1” 10”X30”X1” 12”X12”X1” 12”X16”X1” 12”X20”X1” 12”X24”X1” 12”X25”X1” 12”X30”X1” 14”X20”X1” 14” X 24” X 1”
Size 15” X 20” X 16” X 20” X 16” X 25” X
14”X30”X1” 15”X20”X1” 15”X25”X1” 16”X16”X1” 16”X20”X1” 16”X24”X1” 16”X25”X1” 18”X18”X1” 18”X20”X1” 18”X24”X1” 18”X25”X1”
2” 2” 2”
20”X22”X1” 20”X24”X1” 20”X25”X1” 20”X30”X1” 22”X22”X1” 24”X24”X1” 24”X30”X1” 25”X25”X1”
                                                                     2 INCH FILTER
 Size
20” X 20” X 2” 20” X 25” X 2” 25” X 25” X 2”
         SPuN glaSS HaMMoCK Roll MeDia (LENNOX TYPE)
PeRMaiRe
SeRViCe Roll MeDia (HOG HAIR)
 20" X 25’ X 1" roll 25" X 25’ X 1" roll 30" X 25’ X 1" roll 36" X 25’ X 1" roll
212 Part numbers and illustrations are for identification only © 1971-2018 w.d. armstrong corp.
Size
24" X 240" X 1"
Size
   30" X 240" X 1" 36" X 240" X 1"
                        








































































   216   217   218   219   220