Page 416 - 2018wd_ctr_cat
P. 416

                COMMERCIAL ELECTRIC WATER HEATERS
 MODEL No.
POINT-OF-USE Commercial Electric Water Heaters CE21⁄2AS CE6AS CE12AS CE20AS
GALLON CAPACITY STANDARD KW INPUT MAXIMUM KW INPUT
21⁄2 6 12 19 1.44 1.5 1.5 1.5 1.5 4.5 5.5 6.0
         EXTERIOR DIMENSIONS
A Jacket Diameter
B Floor to Top of Heater
CFloortoT&PValve
D Floor to Side Cold
E Floor to Side Hot
F Floor to Drain Valve
G Floor to Top Water Connections 135⁄8” 151⁄2” 217⁄8” 247⁄8”
CONNECTIONS
Water Connections 3/4” 3/4” 3/4” 3/4”
SHIPPING WEIGHT
(in pounds- approximate) 22.5 38.5 61 78
10” 137⁄8” 157⁄8” 181⁄2” 127⁄8” 145⁄8” 211⁄2” 241⁄2” N/A 107⁄8” 171⁄4” 197⁄8” N/A 23⁄4” 23⁄4” 23⁄4” N/A 107⁄8” 171⁄4” 197⁄8 23⁄4” 23⁄4” 23⁄4” 23⁄4”
                  American Standard Point-Of-Use Commercial Electric Models are the ideal solution for hot water needs in locations wherein it is not practical to run long hot water pipes. These models can be installed in spaces under counters,mop sinks, cabinets or in other confined areas. POINT-OF-USE ELECTRIC WATER HEATER FEATURES
    • Heavy Gauge Steel Tank
• Inner Tank Glasslined With Dura-GlasTM — fired at 1600°F for optimum protection from the effects of corrosion • Non-CFC,Energy-Saving Foam Insulation — reduces fuel cost by maximizing heat retention
• Anode Rod To Ensure Longer Tank Life !
• Immersed Heating Element — applies heat directly to water
• Fully Adjustable Thermostat Control — for variable temperature control to 160°F
• Factory Installed Energy Cut-off System
• Top and Side Water Connections on 6-20 Gallon Models — affording choice of cold-in and hot-out connections • Factory Installed Pressure/Temperature Relief Valve
• Drain Valve Factory Installed On All Models — for easy draining of tank
TESTING & CERTIFICATIONS
• AMERICAN STANDARD commercial electric water heaters — are certified at 300 PSI test pressure and 150
PSI working pressure, and all tanks are 100% hydrostatically tested at the factory
• UL Listed
WARRANTY
• Three year limited warranty on inner glass-lined tank. • One year limited warranty on all other component parts.
                  Model No. CE52AS Capacity Gallons 52 Exterior Dimensions
CE80AS CE120AS
      A Jacket Diameter 243⁄4” B Floor To Cold Water Inlet 61⁄2” C Floor To Top Of Control Box 469⁄16” D Floor To PTR Valve 443⁄8” E Height To Top Of Heater 511⁄2” F Floor To Hot Water Outlet 541⁄4” Front Control Access Panel Depth 41⁄2”
80 119
Water Connection 11⁄2”
Shipping Weight (in pounds) 271         366         483
281⁄4” 301⁄4” 61⁄2 61⁄2 469⁄16” 469⁄16”
 4817⁄32” 597⁄8” 561⁄4” 68 585⁄8” 703⁄4”
41⁄2” 41⁄2”
11⁄2” 11⁄2”
          • 6-54KW, 208, 240, 277, 480 Volt, 1-3 Phase • Commercial Electrical Models are UL listed • Light Duty Commercial Electric Models Available in 30, 40, 50, 66, 80, & 120 Gallon Tall. • Low Boy 3-12 KW, 30, 40, 50 Gallon
410 Part numbers and illustrations are for identification only © 1971-20138 w.d. armstrong corp.
 





















































   414   415   416   417   418