Page 43 - 2018wd_ctr_cat
P. 43

                FLAME TOOLS & ACCESSORIES
 UNITORCH® RP3T6 LP TWISTER® SILVER BULLET® TIP
  • Soft solder copper tubing up to 21⁄2”
• Tip swivels 360° for difficult work areas
• Built-in piezo spark ignitor uses Mapp® or Propane gas • Eliminates the use of a flint lighter
• Operates at any angle
RP3T6 Unitorch® Reg. and L.P. Twister® Tip
    with Silver Bullet® Ignitor
SELF IGNITING HAND TORCH
 HT44 Twister2 Self-Igniting Hand Torch
• Electric trigger ignition • Operates on MAPP® or Propane • Durable cast construction • Trigger Lock
• Twister® swirl combustion tip end • Precise adjustable flame control • Operates in any position .... even upside down
Tube Capacity: Soldering Brazing
Propane: up to 1” up to 5/8”
MAPP® up to 11⁄2” up to 7/8”
                        HEAT SHIELD GEL
The Flame Barrier is Asbestos-free heat resistant up to Heat shield all-temperature bar- 2500°F. Ideal for use with Propane, Mapp® gas
     rier spray prevents heat damage and Acetylene torches.
to nearby components during IT WILL NOT BURN!
 soldering, brazing or welding.
Made of newly developed carbon fibers.
 HS31032
Part No. Size 71036 6” X 9” 71038 9” X 12”
   UNI-4300 ALUMINUM REPAIR KIT
   Cadmium and lead free soft solder and flux for joining unlike metals. Join aluminum to copper and brass quickly and permanently. Our new metal tip flux applicator helps make soldering easy. Don’t panic if your flux has overheated and turned black ... apply more ... the flux will clean the metal to achieve the perfect flow.
P4KD9S UNI-4300 Aluminum Repair Kit
                   SIL•FOS® RINGS
   Brazing alloy composed of 15% Silver (Ag), formed into rings to fit inside the flared fitting used to join copper tubing and fittings commonly used in HVAC/R systems. The rings are easy to use, minimize waste, and provide visual verification of a complete, sound brazed joint.
 • Clean the areas to be brazed using a wire brush or abrasive paper
• Insert ring into fitting & insert tube - make sure tube makes contact with the ring at
the bottom
• Uniformly heat the braze area - Alloy is drawn by capillary action to top of joint Part No. Tube OD Package Part No. Tube OD Package
98700 1/4” 25     98704 3/4” 98701         3/8” 25         98705 7/8” 98702 1/2” 25 98706 11⁄8” 98703 5/8” 25
25 25 10
37
                    Prices subject to change without notice © 1971-2018 w.d. armstrong corp.
  CHARGING RECOVERY WELDING






























































   41   42   43   44   45